The Mexico Compliance Landscape in 2026

Mexico went through a major transition in 2025 that sent shockwaves through the electronics industry. The Instituto Federal de Telecomunicaciones (IFT) was dissolved by the new government regime and replaced with the Agencia de Transformación Digital y Telecomunicaciones (ATDT). Within ATDT, the Comisión Reguladora de Telecomunicaciones (CRT) was created to act as the decentralized administrative body with technical and operational autonomy. CRT issues the Certificates of Homologation necessary for Mexico compliance.  The industry is still recovering and facing delays, as many applications for homologation in Mexico have been stuck in transition for the past several months. Technical standards IFT-016 and IFT-017 were also issued, creating local testing requirements for new technologies, previously approved through the documentation-only process referred to as “perito” review. Besides the new regulatory authority and standards for RF/Telecom, there have been recent updates regarding stricter enforcement at customs, making NOM compliance more important than ever to enter the Mexican marketplace. This blog will explore the new landscape of the Mexican approval system for 2026. 

Overview of approving electronics in Mexico for 2026 

Electronic equipment manufacturers targeting Mexico as a potential sales market should be aware of the key players and processes involved: 

  • Comisión Reguladora de Telecomunicaciones (CRT) – the telecommunications commission responsible for issuing Certifications of Homologation (CoH) that recently replaced IFT. 
  • Agencia de Transformacion Digital y Telecomunicaciones (ATDT) – the telecommunications authority that oversees CRT and makes telecom policies (such as IFT-016 and IFT-016, previously issued by IFT). 
  • Organismo Nacional de Estandarización (National Certification Bodies) – NYCE and ANCE are the most well-known, but there are several more. The  Certification Bodies (CBs) issue NOM Certificates of Conformity (CoC) that allow customs clearance into Mexico 
  • Procedimiento de Evaluación de la Conformidad (PEC) – Mexico’s official conformity assessment procedure for telecom and wireless products that results in Certificates of Homologation (CoH) from CRT. 

The Mexico compliance procedure is a multi-step process which starts off with determining the requirements for each product individually. To ensure that the process goes smoothly, manufacturers should consider the following before starting their Mexico compliance journey: 

  • Product HS code – the HS code that will be used for customs clearance in Mexico is the starting point for Mexico approvals. Mexico has a unique HS code system and maintains a database connecting HS codes to NOMs. Before allowing shipments to pass through customs, customs officials check this database using the HS code. The HS code is best determined by the actual importer or customs broker of the manufacturer, because the HS code on the shipping invoices for shipments clearing customers must match the HS code on the NOM CoC. The NOM CoC may mention multiple HS codes if needed. 
  • Local Representation – identify the local rep that will act as the approval holder. If there is a single importer/distributor, this is the best party to hold the approval. If there are multiple importers/distributors, consider using a third party to hold the initial approval, and extend the approvals to each importer. This can be held by the manufacturer’s local office, or a third-party local agent (such as Approve-IT). 
  • Product technical specifications – once the HS code specific to Mexico is determined, it should be passed through the database that links HS codes to required NOMs. The identified NOMs in the database should be compared to the product and its specifications. If the product fits into the scope of the NOM, then the manufacturer should pursue certification to that NOM. If the product does not fit the scope of the NOM, then a “Dictamen de No Cumplimiento” or “Carta de Resolución Técnica” letter may be obtained by a CB to prove to customs officials that the product is outside of the scope of that NOM and does not require certification.  
  • Determine the Telecom approval path – once the NOMs are identified, the manufacturer should identify the CRT approval path to take: 
  • Type A Homologation: for products that fall under the scope of the PEC, with established NOMs or IFT Technical Dispositions (that don’t have equivalent NOMs such as IFT-012 (SAR), IFT-016, IFT-017, etc.) only applying to the product. Type A requires local testing at an accredited lab in Mexico. 
  • Type B Homologation: for products that do not fit under the scope of the PEC, or any specific NOM or Technical Disposition. Requires “perito” review, resulting in a Memoria Tecnica that is submitted to CRT for review. 
  • Type C Homologation: for products falling into scope of both Type A and Type B and require both local testing and perito review. 
  • Determine the Safety approval path – follow the applicable safety NOM that the product falls under. Engage a local test lab and CB to manage the testing and certification process (normally the same lab and CB can be used for both RF/Telecom and Safety). Safety compliance testing can take place concurrently with RF/Telecom compliance, assuming enough samples are sent to the test lab. 
  • Identify other NOMs – other NOMs exist outside of safety that may apply to the product, such as NOMs for Energy Efficiency, Labeling/Packaging/Warranty, etc. 
  • Consider criteria for family approvals – if you have multiple models in a family or series, consider the NOM safety or CRT family grouping criteria. This can save on local testing costs and CB fees. The criteria for Safety and RF/Telecom is different, so make sure you have an understanding of each system. 

 

Once the approval path is outlined, the next step is to engage the certification body, test lab, and CRT. The updated flow for the actual approval process is the following: 

  • Submit sample units and technical documentation to the CB of choice, identifying the test lab that will be used for local testing (if needed) 
  • Transfer the sample units to the test laboratory for RF/Telecom and/or Safety testing (and any other applicable NOMs) 
  • The test lab will issue a test report and NOM CoC – separate NOM CoCs for Safety and RF/Telecom will be issued. This marks the end of the Safety compliance process. With all applicable NOM CoCs, you can start importing products into Mexico. 
  • Submit the RF/Telecom test report and NOM CoC to CRT for final homologation 
  • If the product requires a perito review, the memoria tecnica will also be included in the “folio” (application) to CRT 
  • CRT will issue a final Certificate of Homologation (CoH) 
  • The CoH will include the CRT approval number that can be used for labeling purposes. CRT labeling is required for sales activities in Mexico. Consumer protection agencies like PROFECO oversee market surveillance and will check to make sure products are properly labeled. 

 

2025-2026 updates that will impact Mexico approvals 

Besides the transition from IFT to CRT, there were several new regulations, technical standards, and procedures implemented that will impact the approval landscape in 2026. The major changes to be aware of and plan for in 2026 are the following: 

  • Customs Law reform – new restrictions on importing devices without proper NOM labeling have been implemented, and new policies will seize and issue fines for non-compliance devices. Although this has always been mandatory, consequences for non-compliance are more severe than past years. 
  • Cybersecurity policy – ATDT published a general cybersecurity policy. Technical guidelines will follow, but this is the start of cybersecurity compliance requirements in Mexico. 
  • IFT-016 and IFT-017 Technical Dispositions – before being dissolved, IFT issued technical regulations under IFT-016 and IFT-017. These came into effect on November 3, 2025 and November 7, 2025 respectively. As mentioned above, these bring new local testing requirements for devices in the 30MHz – 3GHz range, and the Wi-Fi frequency bands 5150-5250 MHz, 5250-5350 MHz, 5470-5600 MHz, 5650-5725 MHz, 5725-5850 MHz and 5925-6425 MHz. Products operating in these bands previously could pass through the perito review process. Now, they must pass testing in accredited laboratories.  

Conclusion 

Mexico historically has been a painful country to navigate in terms of regulatory compliance procedures. It is complex due to many different NOM requirements, multiple parties involved in the approval process, local testing that is similar but not the same as FCC testing, local regulatory authorities that have changed over the years, and new policies being issued seemingly annually. Now more than ever, it is critical to understand the standards that apply to your products, and how to navigate the local approval landscape. Approve-IT has full time staff members in Mexico City who have successfully navigated hundreds of approval processes annually and Approve-IT has had a major presence in the Mexico marketplace for 30+ years. Do not go through Mexico approvals alone! Find an experienced partner to help guide you through the everchanging landscape that is the Mexico approval world. 

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *